Call us on +44 (0) 1709 570212
  • Language

X6CrNiMoTi17.12.2 – Austenitic Stainless Steel

X6CrNiMoTi17.12.2 is an austenitic stainless steel that offers an excellent corrosion resistance due to the addition of molybdenum, which is particularly effective against pitting and and crevice corrosion within chloride based environments. This grade also provides an excellent toughness, even at extremely low temperatures.

Alias

X6CrNiMoTi17.12.2
1.4571
316Ti
S31635

Chemistry

Element Min Max
C (Carbon) 0.08%
Cr (Chromium) 16.5% 18.5%
Mn (Manganese) 2%
Mo (Molybdenum) 2% 2.5%
Ni (Nickel) 10.5% 13.5%
P (Phosphorus) 0.045%
S (Sulphur) 0.015%
Si (Silicon) 1%
Mechanical Properties Min Max
Ultimate Tensile Strength (UTS) 500 MPa 730 MPa
0.2% Proof Stress 210 MPa
Elongation 35%
Charpy V-Impact = Room Temp. 100 Joules

Applications

Typical applications of X6CrNiMoTi17.12.2 may include but are not limited to; Boat fittings, Brewery equipment, Architectural panelling, Heat exchangers, Nuts and bolts, Springs, Medical implants etc.

Disclaimer:
Information is given for illustrative purposes only. Tachart accepts no responsibility for the accuracy of the data contained within or the use of the data by any other party.
This page is protected by copyright and may be freely distributed but not reproduced without permission.

error: Content is Copyright Tachart Bolt & Nut Manufacturing !!