Call us on +44 (0) 1709 570212
  • Language

JETHETE X19

Alias

JETHETE X19
X19CrMoNiNbVN11 1
1.4913
Z21CDNbV11
Z20CNNbV11

Chemistry

Base Element Fe(Iron)

Element Min Max
Al(Aluminium) 0.02%
B(Boron) 0.0015%
C(Carbon) 0.17% 0.23%
Cr(Chromium) 10% 11.5%
Mn(Manganese) 0.4% 0.9%
Mo(Molybdenum) 0.5% 0.8%
N(Nitrogen) 0.05% 0.1%
Nb(Niobium) 0.25% 0.55%
Ni(Nickel) 0.2% 0.6%
P(Phosphorus) 0.025%
S(Sulphur) 0.015%
Si(Silicon) 0.5%
V(Vanadium) 0.1% 0.3%

Mechanical Properties Min Max
Ultimate Tensile Strength (UTS) 900 MPa 1050 MPa
Yield Strength 750 MPa
Elongation 12%
Reduction of Area 40%
Charpy V-Notch Impact (RT) 20 Joules
Hardness (Brinell) 302 HBW

Heat treatment of comparable X19CrMoVNbN11 1;
Hardening temperature of 1150 degs C
Tempering in the range 680-700 degs C

Uses

Bolting

Used commonly within the Power generation industry and Process plants for its high oxidation resistance. Usually used for Turbine fasteners, turbine blading and fasteners.

Disclaimer:
Information is given for illustrative purposes only. Tachart accepts no responsibility for the accuracy of the data contained within or the use of the data by any other party.
This page is protected by copyright but may be freely distributed but not reproduced without permission.

error: Content is Copyright Tachart Bolt & Nut Manufacturing !!