Call us on +44 (0) 1709 570212
Language
Language
UNS S31803
X2CrNiMoN 22 5 3
1.4462
Z3CND22 05 Az
SUS 329J3L
ASTM A182
F51
Stainless Steel
Base Element Fe (Iron)
| Element | Min | Max |
|---|---|---|
| C (Carbon) | 0.03% | |
| Cr (Chromium) | 21% | 23% |
| Mn (Manganese) | 2% | |
| Mo (Molybdenum) | 2.5% | 3.5% |
| N (Nitrogen) | 0.08% | 0.2% |
| Ni(Nickel) | 4.5% | 6.5% |
| P (Phosphorus) | 0.03% | |
| S(Sulphur) | 0.02% | |
| Si (Silicon) | 1% |
| Mechanical Properties | Min | Max |
|---|---|---|
| Ultimate Tensile Strength (UTS) | 620 MPa | |
| Yield Strength | 450 MPa | |
| Elongation | 25% | |
| Reduction of Area | 45% | |
| Gauge Length | A50mm |
Bolting
Piping Component’s for use in pressure systems, including flanges, fittings, valves and other similar parts.
Disclaimer:
Information is given for illustrative purposes only. Tachart accepts no responsibility for the accuracy of the data contained within or the use of the data by any other party.
This page is protected by copyright but may be freely distributed but not reproduced without permission.
