Call us on +44 (0) 1709 570212
Language
Language
AISI 416Se is a martensitic stainless steel that offers the most machinability over all other stainless steels due to the inclusion of sulphur. This inclusion however does reduce the weldability, formability and corrosion resistance of 416 to below that of grade 410. Despite this, grade 416 is still highly resistant to acids, alkalis and dry air.
| Element | Min | Max |
|---|---|---|
| C (Carbon) | 0.09% | 0.15% |
| Cr (Chromium) | 11.5% | 13.5% |
| Mn (Manganese) | 1.5% | |
| Mo (Molybdenum) | 0.6% | |
| Ni (Nickel) | 1% | |
| P (Phosphorus) | 0.06% | |
| S (Sulphur) | 0.06% | |
| Si (Silicon) | 1% |
Applications
Typical applications of AISI 416Se include but are not limited to; pipes, valve trims, shafts, axles, screws, gears and pinions etc.
Disclaimer:
Information is given for illustrative purposes only. Tachart accepts no responsibility for the accuracy of the data contained within or the use of the data by any other party.
This page is protected by copyright and may be freely distributed but not reproduced without permission.
