1.4313 is a low carbon martensitic stainless steel that offers a good strength, toughness and a high weldability. This grade also features a moderate resistance to pitting, crevice and stress cracking.
Element | Min | Max |
---|---|---|
C (Carbon) | 11.5% | 14% |
Cr (Chromium) | 11.5% | 14% |
Mn (Manganese) | 0.5% | 1% |
Mo (Molybdenum) | 0.5% | 1% |
Ni (Nickel) | 3.5% | 5.5% |
P (Phosphorus) | 0.03% | |
S (Sulphur) | 0.03% | |
Si (Silicon) | 0.6% |
Mechanical Properties | Min | Max |
---|---|---|
Ultimate Tensile Strength (UTS) | 790 MPa | |
Yield Strength | 620 MPa | |
Elongation | 15% | |
Gauge Length | 295 HB | |
Reduction | 45% |
Applications
Typical used with the Oil and Gas industry, applications of grade 1.4313 include Flanges, Valve bodies, oil field equipment, pumps, chemical process plans, pressure die casting etc.
Disclaimer:
Information is given for illustrative purposes only. Tachart accepts no responsibility for the accuracy of the data contained within or the use of the data by any other party.
This page is protected by copyright and may be freely distributed but not reproduced without permission.