Appel +44 (0) 1709 570212
  • Langue


Désolé, cet article est seulement disponible en Anglais Américain. Pour le confort de l’utilisateur, le contenu est affiché ci-dessous dans une autre langue. Vous pouvez cliquer le lien pour changer de langue active.


UNS S32750


Stainless Steel
Base Element Fe (Iron)

Element Min Max
C (Carbon) 0.03%
Cr(Chromium) 24 26%
Cu(Copper) 0.5%
Mn(Manganese) 1.2%
Mo(Molybdenum) 3 5%
N(nitrogen) 0.24 0.32%
Ni(Nickel) 6 8%
P(Phosphorus) 0.035%
S(Sulphur) 0.02%
Si(Silicon) 0.8%
Mechanical Property Min Max
Ultimate Tensile Strength (UTS) 800 MPa
Yield Strength 550 MPa
Elongation 15%
Gauge Length A4D
Hardness (Brinell) 310 HB


Common uses include forged fittings and valves for high temperature applications, heat exchangers, chemical tanks, refineries. As well as compressor parts for sea water desalination plants, offshore pressure vessel parts and pipe flanges within the petrochemical industry.

Information is given for illustrative purposes only. Tachart accepts no responsibility for the accuracy of the data contained within or the use of the data by any other party.
This page is protected by copyright but may be freely distributed but not reproduced without permission.

error: Content is Copyright Tachart Bolt & Nut Manufacturing !!