Appel +44 (0) 1709 570212
  • Langue


Désolé, cet article est seulement disponible en Anglais Américain. Pour le confort de l’utilisateur, le contenu est affiché ci-dessous dans une autre langue. Vous pouvez cliquer le lien pour changer de langue active.


UNS S30400


Alloy Steel/Stainless Steel
Base Element Fe(Iron)

Element Min Max
C (Carbon) 0.37% 0.49%
Cr(Chromium) 0.75% 1.2%
Mn (Manganese) 0.65% 1.1%
Mo (Molybdenum) 0.15% 0.25%
P (Phosphorus) 0.035%
S (Sulphur) 0.04%
Si (Silicon) 0.15% 0.35%
Mechanical Properties Min Max
Ultimate Tensile Strength (UTS) 860 MPa
0.2% Proof Stress 720 MPa
Elongation 16%
Gauge Length A4D
Hardness (Brinell) 321 HB
Hardness (Rockwell C) 35 HRC


Bolting for pressure vessels, valves, flanges and fittings for high temperature or high pressure services.

Information is given for illustrative purposes only. Tachart accepts no responsibility for the accuracy of the data contained within or the use of the data by any other party.
This page is protected by copyright but may be freely distributed but not reproduced without permission.

error: Content is Copyright Tachart Bolt & Nut Manufacturing !!