Appel +44 (0) 1709 570212
  • Langue

ISO 898 10.9

Désolé, cet article est seulement disponible en Anglais Américain. Pour le confort de l’utilisateur, le contenu est affiché ci-dessous dans une autre langue. Vous pouvez cliquer le lien pour changer de langue active.

Alias

ISO 898 10.9

Chemistry

Carbon Steel with Additives quenched and tempered

Element Min Max
C (carbon) 0.25% 0.55%
P (Phosphorus) 0.025%
S (Sulphur) 0.025%
B (Boron) 0.003%

Mechanical Properties Min Max
Tensile strength 1040 MPa
0.2% Proof Stress 940 MPa
Elongation 9%
Reduction of Area 48%
Hardness (Brinell) 316 (HB) 375 (HB)
Hardness (Rockwell) 39 HRC 44 HRC
Hardness (Vickers) 320 (HV) 380 (HV)

Uses

General Bolting

Disclaimer:
Information is given for illustrative purposes only. Tachart accepts no responsibility for the accuracy of the data contained within or the use of the data by any other party.
This page is protected by copyright but may be freely distributed but not reproduced without permission.

error: Content is Copyright Tachart Bolt & Nut Manufacturing !!