Call us on +44 (0) 1709 570212
  • Language

Marinel 210

Alias

Marinel 210

Chemistry

Copper Nickel
Base Element Cu(Copper)

Element Min Max
Al (Aluminium) 1.4% 2%
C (Carbon) 0.05%
Cr (Chromium) 0.3% 0.5%
Fe (Iron) 0.6% 1.4%
Mg (Magnesium) 0.05%
Mn (Manganese) 3.5 5.5%
Nb (Niobium) 0.5% 1%
Ni (Nickel) 14% 20 %
P (Phosphorus) 0.01%
Pb (Lead) 0.02%
S (Sulphur) 0.15%
Si (Silicon) 0.15%
Sn (Tin) 0.1%
Zn (Zinc) 0.2%
Others(total) 0.3
Total impurities 0.30%
Mechanical Properties Min Max
Ultimate Tensile Strength (UTS) 870 MPa
0.2% Proof Stress 700 MPa
Elongation 15%
Hardness(Brinell) 240 HB to 320 HB
Charpy V-Notch Impact = Room Temp 20 Joules

Heat Treatment; Precipitation Hardened

Uses

Bolting

Disclaimer:
Information is given for illustrative purposes only. Tachart accepts no responsibility for the accuracy of the data contained within or the use of the data by any other party.
This page is protected by copyright but may be freely distributed but not reproduced without permission.

error: Content is Copyright Tachart Bolt & Nut Manufacturing !!