Call us on +44 (0) 1709 570212
- Language
316S1 is a low carbon variation of grade 316, an austenitic stainless steel. It offers a high resistance to corrosion as well as a good weld-ability and ease of fabrication.
Base Element Fe (Iron)
| Element | Min | Max |
|---|---|---|
| C (Carbon) | 0.03% | |
| Cr (Chromium) | 16% | 18% |
| Mn (Manganese) | 2% | |
| Mo (Molybdenum) | 2% | 2.5% |
| Ni (Nickel) | 11% | 13% |
| P (Phosphorus) | 0.04% | |
| S (Sulphur) | 0.03% | |
| Si (Silicon) | 1% |
| Mechanical Properties | Min | Max |
|---|---|---|
| Ultimate Tensile Strength (UTS) | 620 MPa |
Typical applications of grade 316S1 are found within the Marine, Petrochemical, Oil and Gas, Food preparation, Medical and Architectural industries, such examples being; fasteners, Medical Implants, Heat exchangers, Semiconductors etc.
Disclaimer:
Information is given for illustrative purposes only. Tachart accepts no responsibility for the accuracy of the data contained within or the use of the data by any other party.
This page is protected by copyright and may be freely distributed but not reproduced without permission.
