Marinel 210
Copper Nickel
Base Element Cu(Copper)
Element | Min | Max |
---|---|---|
Al (Aluminium) | 1.4% | 2% |
C (Carbon) | 0.05% | |
Cr (Chromium) | 0.3% | 0.5% |
Fe (Iron) | 0.6% | 1.4% |
Mg (Magnesium) | 0.05% | |
Mn (Manganese) | 3.5 | 5.5% |
Nb (Niobium) | 0.5% | 1% |
Ni (Nickel) | 14% | 20 % |
P (Phosphorus) | 0.01% | |
Pb (Lead) | 0.02% | |
S (Sulphur) | 0.15% | |
Si (Silicon) | 0.15% | |
Sn (Tin) | 0.1% | |
Zn (Zinc) | 0.2% | |
Others(total) | 0.3 | |
Total impurities | 0.30% |
Mechanical Properties | Min | Max |
---|---|---|
Ultimate Tensile Strength (UTS) | 870 MPa | |
0.2% Proof Stress | 700 MPa | |
Elongation | 15% | |
Hardness(Brinell) | 240 HB to 320 HB | |
Charpy V-Notch Impact = Room Temp | 20 Joules |
Heat Treatment; Precipitation Hardened
Uses
Bolting
Disclaimer:
Information is given for illustrative purposes only. Tachart accepts no responsibility for the accuracy of the data contained within or the use of the data by any other party.
This page is protected by copyright but may be freely distributed but not reproduced without permission.