- Home
- Profile
- Customers
- Valve, Pump & Flow Control
- Oil, Gas & Offshore
- Subsea & Marine
- Nuclear Energy
- Defence
- Maritime Defence
- Power & Transmissions
- Extreme / Motor Sport
- Pulp Paper Industry
- Materials
- Carbon & Alloy Steels
- Stainless Steels
- Copper, Brass, Bronze
& Cupro-nickel Alloys - Nickel Alloys
- Aluminium & Titanium
Alloys & Polymers - Products
- 24 Hr Production & Delivery
- Gallery
- Certificates
- Contact
BNM receives “space praise” for screws manufactured for the €195m Sentinel 2 Earth observation satellite due for launch in 2013. Paul Bridgeman, Spacecraft Engineer at the European Space Tribology Laboratory commended BNM “I must say that the quality of the finished items are second to none. Thank you for your understanding, patience and professionalism, we will certainly recommend you. I look forward to using your services in the future”.
Typical materials (nuclear)
Carbon, alloy & high tensile steels:
Grades 8.8 10.9 12.9
High Tensile Steel
A193: B7 / B7M / B16
A194: Gr 4 / 7 / 2H / 2HM
A320: L7 / L7A
Carbon, alloy & high tensile steels:
Grades 8.8 10.9 12.9
High Tensile Steel
A193: B7 / B7M / B16
A194: Gr 4 / 7 / 2H / 2HM
A320: L7 / L7A
Stainless steels:
304 / 316 / A2 / A4
17-4 PH / 17-7 PH
A193: B6 / B8M / B8MCL2
A194: Gr. 8 / Gr. 8MA
JETHETE / 1.4913 / 1.4923
Alloy 20 /Carpenter20
Duplex (S31803)
Super Duplex (S32760)
Nickel alloys:
Inconel / B446 / 1
Hastelloy
A286 660B / A453 660
BNM’s nuclear customers benefit from high quality machining, total product confidence and the most rapid production and delivery service in the industry. We are able to manufacture and deliver nuclear accredited components within 24 Hours.
Our production staff are specially trained according to the requirements of ASME Code III / RCC-M and we welcome any quality and inspection team to vet our Nuclear compliance and ISO 9001 system for their own approval. BNM's ISO procedures are already approved by two large independant and Western European Engineering companies under the provision of their respective N-stamp for both ASME III & RCC-M safety class components.
Typical products (nuclear):
Our production staff are specially trained according to the requirements of ASME Code III / RCC-M and we welcome any quality and inspection team to vet our Nuclear compliance and ISO 9001 system for their own approval. BNM's ISO procedures are already approved by two large independant and Western European Engineering companies under the provision of their respective N-stamp for both ASME III & RCC-M safety class components.
Typical products (nuclear):
| Hexagon bolt and Setscrew Studbolt, Studs, Engineer’s Stud & Necked stud Threaded bar Socket head Capscrew Bi-hexagonal / 12 point Bolt & Nut Machine screw & Countersunk machine screw Hexagon nut, Lock nut, Slotted nut & Castle nut Full nut & Heavy series nut All metal prevailing torque nut and nylon insert nut Capnut, Stud protector & End cap protector Eyebolt & Swings bolt U bolt & J bolt Pin, Locking pin & Locking collars |
Typical Coatings:
Teflon / PTFE / Xylan
Stanal
Cadmium / Silver / Gold
Hot Dipped Galvanising
Zinc & Chromate Passivation
Teflon / PTFE / Xylan
Stanal
Cadmium / Silver / Gold
Hot Dipped Galvanising
Zinc & Chromate Passivation
Typical Testing Services:
Chemical Analysis & PMI Testing
Mechanical Properties
Proof Load
Ultrasonic
Magnetic Particle MPI
Dye Penetrant DPI
Chemical Analysis & PMI Testing
Mechanical Properties
Proof Load
Ultrasonic
Magnetic Particle MPI
Dye Penetrant DPI
Typical Standards:
ASME Code Section III
NACE MR-01-75
PED 97/23/EC
Norsok MDS M630
ASME Code Section III
NACE MR-01-75
PED 97/23/EC
Norsok MDS M630
Other Services:
Upset Forging
Grinding
Heat treatment
Thread Rolling
Upset Forging
Grinding
Heat treatment
Thread Rolling
